[Hometech] HDMI to USB 3.0 Video Capture Device with 4K Input and 1080P 60fps Recording

[Hometech]A Plug-and-Play Capture Card That Takes 4K In and Puts 1080P 60FPS Out

Mid-stream your video stutters and the chat fills up with lag complaints. You're digging through settings while your stream sits there looking broken on screen. Record sharp gameplay, run live sessions without lag complaints, or stream weekend tournaments clean.

Run HDMI from your console into the card, then plug USB 3.0 into your computer. Your game plays on your TV with zero lag while video goes straight to your software. Plug mic and headphones into the two 3.5mm ports for full audio.

It takes in up to 4K at 60fps and puts out recordings at 1080p 60fps. No drivers needed, plug it in and your system picks it up right away. Aluminum alloy surrounds the internals and pulls heat away during long sessions.

Single channel capture keeps focus on one clean video source at a time. Hook up consoles, webcams, cameras, or computers across all major operating systems. Powered straight from USB, and a USB cable and user manual both come in the box.

• 4K 60FPS INPUT WITH 1080P 60FPS OUTPUT: Accepts up to 4K at 60fps from your source and delivers clean 1080p 60fps recordings so your stream and capture files stay sharp and smooth without sacrificing output quality.
  
  
• ZERO LAG PASSTHROUGH TO TV: Sends your gameplay directly to your TV with no processing delay so you play on screen at full performance while the card captures the signal independently for your stream or recording.
  
  
• USB 3.0 PLUG-AND-PLAY CONNECTION: Connects directly to your computer over USB 3.0 with no driver installation required so your system recognizes the card immediately and you are ready to record or stream within minutes of plugging in.
  
  
• DUAL 3.5MM AUDIO PORTS: Dedicated ports for a microphone and headphones give you full audio input and monitoring capability so your stream captures clean voice audio without needing a separate audio interface.
  
  
• ALUMINUM ALLOY HEAT DISSIPATING SHELL: Surrounds the internals and actively pulls heat away from the card during long streaming and recording sessions so the unit stays cool and stable without throttling or shutting down.
  
  
• SINGLE CHANNEL CLEAN CAPTURE: Focuses on one dedicated video source at a time so there is no signal mixing or interference between inputs and your recording stays clean and consistent throughout each session.
  
  
• WIDE DEVICE AND OS COMPATIBILITY: Works with consoles, webcams, cameras, and computers across all major operating systems so the card integrates into your existing setup without compatibility checks or software conflicts.
  
  
• USB POWERED NO EXTERNAL SUPPLY NEEDED: Draws all power directly from your USB connection so there is no separate power brick, adapter, or wall outlet required to keep the card running during a session.

[Hometech]Product Specifications

• Type: USB 3.0 HDMI Capture Card
• Input Resolution: Up to 4K at 60fps
• Output Resolution: 1080p at 60fps
• Passthrough: Zero Lag to TV
• Connection: USB 3.0
• Audio Ports: Two 3.5mm (Microphone and Headphones)
• Shell Material: Aluminum Alloy
• Driver Requirement: None, Plug-and-Play
• Power Source: USB Powered
• Channel Mode: Single Channel
• Compatible Devices: Consoles, Webcams, Cameras, Computers
• Compatible OS: All Major Operating Systems

[Hometech]What's Included

• 1 x 4K HDMI Capture Card
• 1 x USB Cable
• 1 x Additional Cable
• 1 x User Manual

[Hometech]Frequently Asked Questions

Will my game experience any lag while the card is capturing?
No, the zero lag passthrough sends your gameplay directly to your TV without any processing delay so you play at full performance on screen while the card captures the signal separately for your stream or recording.

Do I need to install drivers before I can start using this card?
No, the card is fully plug-and-play over USB 3.0 so your operating system detects and recognizes it immediately after plugging in without any driver downloads or software installation required before your first session.

Can I connect a microphone directly to this capture card?
Yes, two dedicated 3.5mm ports handle a microphone and headphones separately so you can capture clean voice audio and monitor your stream audio simultaneously without needing a separate audio interface in your setup.

Will it work with my console, camera, and streaming software?
Yes, the card is compatible with consoles, webcams, cameras, and computers across all major operating systems so it integrates directly into your existing setup without compatibility checks or conflicts with your preferred streaming or recording software.